Scheme of the THAI+ facility, Becker Technologies.

The experimental investigations carried out in the frame of the THAI (2007-2009), THAI-2 (2011-2014) and THAI-3 (2016-2019) projects contributed s...

Scheme of the PKL facility, Framatome GmbH.

The SESAR Thermal-hydraulics (SETH) Project began in 2001 and consisted of thermal-hydraulic experiments in support of accident management, which were ca...

Multi-compartment THAI+ test facility, Becker Technologies GmbH.

In the wake of the OECD/NEA THAI project, conducted in three phases from 2007 until 2019, a new project, THAI Experiments on Mitigat...

View looking down onto the LOFT reactor

The Loss-of-fluid Test (LOFT) Research Programme was originally set up by the US Nuclear Regulatory Commission. Part of the programme was later broadened int...

Irradiation Vessel with Coupons, CNL

The NEA Behaviour of Iodine Project (BIP) was created to provide separate effects and modelling studies of iodine behaviour in a nuclear reactor containment bui...

PANDA vessel assembly (construction phase, 1993), PSI.

The PANDA project is a follow-up of the HYMERES-2 project, and its general objective is to advance the knowledge on the containment of thermal...

Scheme of the DIVA Facility, IRSN

The Fire Risk Assessment through Innovative Research Project is a follow-up of the PRISME project series which addresses new fire scenarios and new topics of inter...

Image: QUENCH facility at KIT. Court. KIT. 

The purpose of the QUENCH-ATF project is to investigate the chemical, mechanical and thermal-hydraulics behaviour of ATF claddings in Design Basis Accident...

Cabri Reactor (Commissariat à l’énergie atomique et aux énergies alternatives)

The Cabri International Project (CIP) began in March 2000 to study the behaviour of nuclear fuel rods and cladding durin...

A cabinet containing copper bus before the HEAF test (left) and after the test(right). Source: NRC

Massive electrical discharges, referred to as high energy arcing faults (HEAF), have occurred in nuc...